Initial import

code/macro_keyboard/macro_keyboard.ino

@@ -0,0 +1,119 @@
+#ifdef __AVR__
+#include <avr/power.h>
+#endif
+#include <HID-Project.h>
+//#include <Keyboard.h>
+//#include <Mouse.h>
+#include <Keypad.h>
+#include <Encoder.h>
+#include <LiquidCrystal_I2C.h>
+#include <Adafruit_NeoPixel.h>
+#include "macro_keyboard.h"
+
+void setup() {
+  pinMode(KEYBOARD_MODEBUTTON_PIN, INPUT_PULLUP);  // initialize the mode-button pin as a input
+  Consumer.begin();                   // initialize the MediaPlayer functions
+  Keyboard.begin();                   // initialize the keypad
+  pixels.begin();                     // initialize the NeoPixels
+
+  lcd.init();                         // initialize the 4x20 lcd
+  lcd.backlight();                    //turn on the backlight
+  lcd.begin(LCD_NB_COLUMNS , LCD_NB_ROWS);
+  lcd.setCursor(0, 0); lcd.print("Macro KB RC V2.0");
+  lcd.setCursor(0, 1); lcd.print("(c) 2020 Ryan Bates");
+
+  positionEncoderA = RotaryEncoderA.read()/ROTARY_SENSITIVITY; 
+  positionEncoderB = RotaryEncoderA.read()/ROTARY_SENSITIVITY; 
+
+  for (int i = 0; i <= (KEYBOARD_ROWS * KEYBOARD_COLS); i++) {
+    pixels.setPixelColor(i, pixels.Color( 15,  15,  15));
+    pixels.show();
+    delay(20);
+  }
+/*  
+  for (int i = 0; i <= (KEYBOARD_ROWS * KEYBOARD_COLS); i++) {
+    pixels.setPixelColor(i, pixels.Color(127,   0,   0));
+    pixels.show();
+    delay(25);
+  }
+  delay(100);
+  for (int i = (KEYBOARD_ROWS * KEYBOARD_COLS); i >= 0; i--) {
+    pixels.setPixelColor(i, pixels.Color(  0, 127,   0));
+    pixels.show();
+    delay(25);
+  }
+  delay(100);
+  for (int i = 0; i <= (KEYBOARD_ROWS * KEYBOARD_COLS); i++) {
+    pixels.setPixelColor(i, pixels.Color(  0,   0, 127));
+    pixels.show();
+    delay(25);
+  }
+  delay(100);
+  for (int i = (KEYBOARD_ROWS * KEYBOARD_COLS); i >= 0; i--) {
+    pixels.setPixelColor(i, pixels.Color(  0,   0,   0));
+    pixels.show();
+    delay(25);
+  }
+  delay(100);
+*/
+  colorUpdate = 1;
+}
+
+void loop() {
+  key = keypad.getKey();
+
+  //  mouseMove = (analogRead(KEYBOARD_POT_PIN)); //reading the analog input, pot = pin A1
+  //  mouseMove = map(mouseMove, 0,1023, 1,124); //remap the analog pot values fron 1 to 124
+
+  switch (keyboardMode()) {                  // switch between keyboard configurations:
+    case KEYBOARD_MODE0:
+      keyboard_Mode0();
+      encoderA_Mode0();
+      encoderB_Mode0();
+      colors_Mode0();
+      display_Mode0();
+      break;
+    case KEYBOARD_MODE1:
+      keyboard_Mode1();
+      encoderA_Mode1();
+      encoderB_Mode1();
+      colors_Mode1();
+      display_Mode1();
+      break;
+    case KEYBOARD_MODE2:
+      keyboard_Mode2();
+      encoderA_Mode2();
+      encoderB_Mode2();
+      colors_Mode2();
+      display_Mode2();
+      break;
+    case KEYBOARD_MODE3:
+      keyboard_Mode3();
+      encoderA_Mode3();
+      encoderB_Mode3();
+      colors_Mode3();
+      display_Mode3();
+      break;
+  }
+  delay(1);  // delay in between reads for stability
+}
+
+char keyboardMode() {
+  buttonState = digitalRead(KEYBOARD_MODEBUTTON_PIN);
+
+  if (buttonState != lastButtonState) { // compare the buttonState to its previous state
+    if (buttonState == LOW) { // if the state has changed, increment the counter
+      // if the current state is LOW then the button cycled:
+      keyboardState++;
+      colorUpdate = 1;      // set the color change flag ONLY when we know the mode button has been pressed.
+      // Saves processor resources from updating the neoPixel colors all the time
+    }
+    delay(10); // Delay a little bit to avoid bouncing
+  }
+  lastButtonState = buttonState;  // save the current state as the last state, for next time through the loop
+  if (keyboardState > KEYBOARD_LAST_MODE) {       //reset the counter after 4 presses CHANGE THIS FOR MORE MODES
+    keyboardState = KEYBOARD_MODE0;
+  }
+
+  return keyboardState;
+}